If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
See the following if the indicators do not show clearly what the problem might be.
s "When the Indicators Provide No Help" p.71
Reading the Indicators
The projector has the following indicators that indicate its current operating status.
You can check the status of each projector by using the indicators on the commander and the receiver.
A
Power indicator Indicates the operating status.
Standby condition
When the [t] button is pressed in this condition, projection starts.
Cool-down in progress
All buttons are disabled while the indicator is flashing.
Warming up
Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing.
The [
t
] button is disabled during warm-up.
Projecting
Problem Solving
67
To Next Page
Loading...
