This section explains how to replace the lamp and the air filter.
Replacing the Lamp
Lamp replacement period
It is time to replace the lamp when:
x The following message is displayed.
Regarding the numbers displayed next to icons; 1 indicates the
commander and 2 indicates the receiver.
Replace the lamp for the projector indicated by the arrow.
The message is displayed for 30 seconds.
x The lamp indicator flashes orange.
x The projected image gets darker or starts to deteriorate.
Attention
x The lamp replacement message is set to appear after the following time
periods in order to maintain the initial brightness and quality of the projected
images.
When using Power Consumption continually at Normal: About 3900 hours
When using Power Consumption continually at ECO: About 4900 hours
s Settings - Power Consumption p.60
x If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if
it is still working.
x Do not repeatedly turn off the power and immediately back on. Turning the
power on and off frequently may shorten the lamp's operating life.
x Depending on the characteristics of the lamp and the way it has been used,
the lamp may become darker or stop working before the lamp warning
message appears. You should always have a spare lamp unit ready in case it is
needed.
How to replace the lamp
The lamp can be replaced even when the projector is suspended from a
ceiling.
Replacing Consumables
84
To Next Page
Loading...
