Epson EB-W16SK - Communications Protocol

To Next Page

To Previous Page

s Epson Projector Contact List

Communications protocol

x Default baud rate setting: 9600 bps

x Data length: 8 bit

x Parity: None

x Stop-bit: 1 bit

x Flow control: None

Monitoring and Controlling

Main Page

Notations Used in this Guide2
- Table of Contents3
Introduction6
Projector Features7
- Stacking Two Projectors7
- Superimpose Two Images with Ease7
- Project Realistic 3D Images7
- Useful Functions for Projecting Images7
Part Names and Functions9
- Device Configuration9
- Front/Top9
- Side10
- Rear11
- Base12
- Control Panel13
- Remote Control15
  - Replacing the Remote Control Batteries17
  - Remote Control Operating Range18
Preparing the Projector19
Installing the Projector20
- Installation Methods20
Connecting Equipment21
- Connecting the Commander and the Receiver21
- Connecting a Computer22
  - Connecting with Computer Cables22
  - Connecting with HDMI Cables24
- Connecting Image Sources25
- Connecting External Equipment29
Basic Usage31
Projecting Images32
- From Installation to Projection32
- Automatically Detect Input Signals and Change the Projected Image (Source Search)34
- Switching to the Target Image by Remote Control35
Adjusting Projected Images36
- Superimposing Two Images36
- Adjusting the Image Size36
- Adjusting the Image Position36
- Adjusting the Horizontal Tilt36
- Correcting the Focus37
- Adjusting the Volume37
- Selecting the Projection Quality (Selecting Color Mode)37
- Setting Auto Iris38
- Changing the Aspect Ratio of the Projected Image39
  - Changing Methods39
  - Changing the Aspect Mode39
Useful Functions41
Projection Functions42
- Projecting 3D Images42
Contents45
- Hiding the Image and Sound Temporarily (A/V Mute)45
- Freezing the Image (Freeze)46
- Enlarging Part of the Image (E-Zoom)47
Security Functions48
- Managing Users (Password Protect)48
- Restricting Operation (Control Panel Lock)50
- Anti-Theft Lock52
  - Installing the Wire Lock52
Monitoring and Controlling53
- ESC/VP21 Commands53
Configuration Menu55
Using the Configuration Menu56
List of Functions57
- Configuration Menu Table57
- Image Menu58
- Signal Menu58
- Settings Menu60
- Extended Menu61
- Info Menu (Display Only)62
- Reset Menu63
Troubleshooting64
Using the Help65
Problem Solving67
- Reading the Indicators67
- When the Indicators Provide no Help71
- Problems Relating to Images72
- Problems When Projection Starts77
  - The Projector Does Not Turn on77
  - One of the Projectors Is Not Turned On, or the Projectors Have Not Been Linked Together78
- Other Problems78
Maintenance81
Cleaning82
- Cleaning the Projector's Surface82
- Cleaning the Lens82
- Cleaning the Polarizer82
- Cleaning the 3D Glasses82
- Cleaning the Air Filter83
Replacing Consumables84
- Replacing the Lamp84
Contents88
- Replacing the Air Filter88
  - Air Filter Replacement Period88
  - How to Replace the Air Filter88
Appendix90
Clearing Stack Mode and then Using a Projector91
- Turning on One Projector in a Stacked Configuration91
  - Turning on Only the Commander91
  - Turning on Only the Receiver91
- Clearing the Stacked Configuration and Using One Projector91
Optional Accessories and Consumables94
- Optional Accessories94
- Consumables95
Screen Size and Projection Distance96
- Projection Distance96
Supported Monitor Displays98
- Supported Resolutions98
Specifications100
- Projector General Specifications100
Appearance105
Glossary106
General Notes108
- About Notations108
- Trademarks and Copyrights108

Epson EB-W16SK - Communications Protocol

Table of Contents

Other manuals for Epson EB-W16SK

Related product manuals