Epson EB-W16SK - Page 16

Name Function
L
[User] button
Select any frequently used item from the four available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s "Settings Menu" p.60
M
[Page] buttons
[[][]]
These buttons cannot be used while projecting in a stacked
configuration.
N
[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.47
O
[A/V Mute] button
x Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.45
x You can change the Projection mode as follows by
pressing the button for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
P
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.65
Q
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.46
R
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.37
S
[Pointer] button
This cannot be used while projecting in a stacked
configuration.
T
[Esc] button
x Stops the current function.
x If pressed when the Configuration menu is displayed, it
moves to the previous level.
s
"Using the Configuration Menu" p.56
Name Function
U
[Color Mode] button
Each time the button is pressed, the Color Mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.37
V
[2D/3D] button
Each time the button is pressed, the mode changes to 2D or
3D. Change to 3D mode when a 3D signal is being input. If
a 3D signal is input while in 2D mode, the image is
projected in 2D.
W
[LAN] button
This cannot be used on the projector.
X
[USB] button
This cannot be used while projecting in a stacked
configuration.
Y
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.34
Z
Remote control light-
emitting area
Outputs remote control signals.
Part Names and Functions
16