Using the Printer Driver For Windows 91
3
3
3
3
3
3
3
3
3
3
3
3
PostScript Language Level
Specify the PostScript language level to use. The options are 1, 2,
and 3.
Send PostScript Error Handler
Specify whether the printer automatically prints out a page with
PostScript error messages when an error occurs in the print job.
The options are Yes and No.
Mirrored Output
Specify whether the document is printed as a mirror image by
reversing the horizontal coordinates of the image. The options are
Yes and No.
Density
Specify the density to print in. The options are Lightest, Light,
Medium, Dark, and Darkest.
RITech
Select whether to use RITech when printing. RITech improves the
appearance of printed lines, text, and graphics. The options are
On and Off.
Toner Save Mode
Select whether to use the Toner Save Mode when printing. When
the Toner Save Mode is turned on, the printer uses about 50% less
toner than normal. The options are On and Off.
Image Protect
This setting enables you to specify whether to use lossy
compression when memory runs low during printing. The
options are On and Off. When Image Protect is set to On, lossy
compression is not used. If it is set to Off, lossy compression is
used when memory resources are too low.
To Next Page
Loading...
