424 Technical Specifications
Emulation name
AppleTalk protocol
Hardware requirements
Your printer must meet the following hardware requirements to
be able to use the PostScript 3 printer driver.
❏ Memory requirements for using the PostScript 3 printer
driver are shown below. Install optional memory modules
into your printer if the amount of memory currently installed
does not meet your printing needs.
* Printing may not be possible with this amount of memory, depending on the
specifics of the job being printed.
Interfaces
Parallel interface
Use only an IEEE 1284-B compliant parallel connector.
in PJL: POSTSCRIPT
in EJL: PS
Entity Type: LaserWriter
Emulation Type: POSTSCRIPT-00
Minimum memory Recommended memory
8 MB*
(for a simple print job at 300 dpi)
40 MB or more
To Next Page
Loading...
