Epson EPL-6200 - Setting up a Clients

202 Setting Up Your Printer on a Network (EPL-6200)
Setting up a clients
This section describes how to install the printer driver by
accessing the shared printer on a network.
Note:
❏ To share the printer on a Windows network, you need to set the
printer server. For details, see “Setting up your printer as a shared
printer” on page 193 (Windows Me, 98, or 95) or “Using an
additional driver” on page 195 (Windows XP, 2000, or NT 4.0).
❏ This section describes how to access the shared printer on a standard
network system using the server (Microsoft workgroup). If you
cannot access the shared printer due to the network system, ask the
administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing
the shared printer from the Printers folder. You can also access the
shared printer from Network Neighborhood or My Network on the
Windows desktop.
❏ You cannot use the additional driver on the server system OS.
❏ When you want to use EPSON Status Monitor 3 at clients, you
have to install both of the printer driver and EPSON Status Monitor
3 in each client from the CD-ROM.
With Windows Me, 98, or 95
Follow these steps to set Windows Me, 98, or 95 clients.
1. Click Start, point to Settings, and click Printers.
2. Double-click the Add Printer icon, then click Next.
3. Select Network printer, then click Next.
4. Click Browse, and the Browse for Printer dialog box appears.