Epson EPL-6200 - Removing an Interface Card

Installing and Removing Options (EPL-6200 only) 303
8
8
8
8
8
8
8
8
8
8
8
8
If the installed interface is not shown on the status sheet, turn off
the printer, unplug it, disconnect all interface cables, and review
the steps above to make sure you installed the interface card
correctly. If the installed interface still does not show up on the
status sheet, contact your dealer or a qualified service
representative for assistance.
Removing an interface card
To remove the optional interface card, perform the installation
procedure in reverse.