454 Working with Fonts
System requirements
To use EPSON BarCode Fonts, your computer system should
meet the following requirements:
Note:
EPSON BarCode Fonts can only be used with EPSON printer drivers.
Installing EPSON BarCode Fonts
Follow these steps to install EPSON BarCode Fonts. The
procedure described here is for installation in Windows 98; the
procedure for other Windows operating systems is nearly the
same.
1. Make sure that the printer is off and that Windows is running
on your computer.
2. Insert the printer software CD-ROM into the CD-ROM drive.
Note:
❏ If the language selection window appears, select your country.
❏ If the EPSON Installation Program screen does not appear
automatically, double-click the My Computer icon, right-click
the CD-ROM icon, and click OPEN in the menu that
appears.Then double-click Epsetup.exe.
Computer: IBM PC series or IBM compatible with an
i386SX or higher CPU
Operating system: Microsoft Windows Me, 98, 95, XP, 2000, or
NT 4.0
Hard disk: 15 to 30 KB of free space, depending on the
font
To Next Page
Loading...
