Working with Fonts 449
C
C
C
C
C
C
C
C
C
C
C
C
Selecting Fonts
Whenever possible select fonts from the font list in your
application. See your software documentation for instructions.
If you are sending unformatted text to the printer directly from
DOS or if you are using a simple software package that does not
include font selection, you can select fonts by clicking Type in the
Remote Control Panel utility’s main screen when in the LJ4 mode.
Click Others when in the ESC/P2, FX, or I239X mode.
Downloading Fonts
Fonts that reside on your computer’s hard disk can be
downloaded, or transferred, to the printer so they can be printed.
Downloaded fonts, also called soft fonts, remain in printer
memory until you turn off the printer or otherwise reinitialize it.
If you plan on downloading many fonts, make sure your printer
has sufficient memory.
Most font packages make it easy to manage fonts by providing
their own installer. The installer gives you the option of having
the fonts automatically downloaded whenever you start your
computer or having fonts downloaded only when you need to
print a particular font.
EPSON Font Manager (Windows only)
The EPSON Font Manager provides you with 131 software fonts.
Note:
The EPSON Font Manager can only be used with the EPL-6200.
To Next Page
Loading...
