Epson EPL-6200 - Selecting the Postscript Printer Driver

Using the Printer Driver For Macintosh 133
4
4
4
4
4
4
4
4
4
4
4
4
3. Click Install.
4. When installation is done, click Quit.
5. Restart your computer.
This completes the installation of the printer software. You now
need to select the printer driver as described in the next section.
If you are not able to print after a Custom Install, perform the Easy
Install installation to copy all necessary files to your computer.
If you are connecting two or more printers of the same model
using AppleTalk, and you want to rename the printer, see the
Administrator’s Guide that shipped with the printer.
Selecting the PostScript printer driver
If the printer is fitted with an optional network card, select it from
the Chooser as described below.
Note:
If the printer is connected to your computer via a USB port, see the
previous section entitled “Setting for a USB Connection” on page 184
for information on how to select the printer.