104 Using the Printer Driver For Windows
Status Alert window
The Status Alert window appears automatically when an error
occurs. It indicates what type of error has occurred and offers you
a possible solution. It closes automatically once the problem is
cleared.
The Status Alert window opens when an error has occurred. The
window does not open when the error is set to do not notify in
the Monitoring Preferences dialog box.
EPL-6200
1. Use SMB for
communication:
You can monitor using both
Winsock1.1 and SMB if you select the
Use SMB for communication check
box. If you do not select it, you can
monitor only using Winsock1.1.
2. Monitor over routers: In Windows XP/2000, you can
monitor Windows shared printers
over routers if you select the Monitor
over routers check box.
To Next Page
Loading...
