408 Troubleshooting
Font and image problems
The font on the printout is different from that on the screen.
Cause What to do
The PostScript screen fonts are
not installed.
The PostScript screen fonts must be
installed on the computer that you are
using. Otherwise, the font that you select
is substituted by some other font for
display on the screen.
The printer fonts cannot be installed.
Cause What to do
The emulation mode setting is
not set to PS3 for the interface
that you are using.
Change the emulation mode setting to
PS3 for the interface that you are using,
then try reinstalling the printer fonts
again.
The edges of texts and/or images are not smooth.
Cause What to do
The resolution is set to Fast. Change the Resolution setting on the
Print Setting setup option page in the
Print dialog box to Quality.
The printer does not have
sufficient memory.
Increase the printer memory.
To Next Page
Loading...
