118 Using the Printer Driver For Macintosh
About the Printer Software
The printer driver lets you choose from a wide variety of settings
to get the best results from your printer, while the EPSON Status
Monitor 3 lets you check the status of your printer. The EPL-6200
also comes with a PostScript printer driver for printing files
formatted in PostScript 3.
You cannot usually make settings, such as resetting the
photoconductor counter, in the printer driver. The Remote
Control Panel utility allows you to make such settings. To install
the Remote Control Panel utility, see “Installing the Remote
Control Panel utility” on page 273.
System Requirements
To use the printer software, your Macintosh must be running one
of the following operating systems:
Mac OS 8.6 to 9.x
Mac OS X, version 10.1.2 and higher
c
Caution:
❏ Do not install the PostScript printer driver (for the EPL-6200
only) included in the CD-ROM that shipped with your
printer on a computer running System 8.5 or earlier.
Installing the PostScript printer driver on earlier systems
can corrupt them.
❏ The PostScript printer driver (for the EPL-6200 only)
included in the CD-ROM that shipped with your printer
cannot be used on Macintosh 68K computers.
To Next Page
Loading...
