Using the Remote Control Panel Utility (EPL-6200 only) 275
7
7
7
7
7
7
7
7
7
7
7
7
If you selected AppleTalk in the previous step, the screen
below appears:
Note:
❏ AppleTalk Zones are displayed if they are set up on the network.
Select the zone that the printer is connected to. If you do not
know which AppleTalk zone the printer is connected to, ask your
network administrator.
❏ The printer name may be different when it is connected to an
AppleTalk network. Confirm the printer name with your
network administrator.
4. Click Setting.
Note:
You can print a status sheet by clicking Status Sheet.
To Next Page
Loading...
