Installing and Removing Options (EPL-6200 only) 297
8
8
8
8
8
8
8
8
8
8
8
8
w
Warning:
❏ Be careful when working inside the printer as some
components are sharp and may cause injury.
❏ Avoid touching the electrical components that are
exposed after you remove the right side cover. Be aware
that these components may become hot while the printer
is in use.
c
Caution:
Before you install the module, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise,
you may damage static-sensitive components.
5. Unpack the memory module and remove all protective
materials.
6. Firmly insert the memory module into the RAM slot (gray)
until it locks into place.
To Next Page
Loading...
