Epson EPL-6200 - Page 316

Installing and Removing Options (EPL-6200 only) 299
8
8
8
8
8
8
8
8
8
8
8
8
7. Replace the printer’s right side cover as shown below.
8. Reconnect all interface cables.
9. Plug the printer’s power cord into the printer and into an
electrical outlet.
10. Turn on the printer.
To verify that the memory module is correctly installed, print a
status sheet. See “Printing a Status Sheet” on page 362 to print a
status sheet.
If an incorrect amount of memory is shown on the status sheet,
turn off the printer and review the steps above to make sure you
correctly installed the memory module. If the amount of memory
is still incorrect, contact your dealer or a qualified service
representative for assistance.
Note:
After installing both the printer driver and the EPSON Status Monitor
3, Windows users can confirm whether the memory module is correctly
installed by checking the printer driver. The memory module status is
displayed in the Optional Settings sheet in the printer’s Properties dialog
box.