310 Replacing Consumable Products
c
Caution:
You must completely open the printer cover when replacing
the developer cartridge; otherwise, you may damage the
printer.
3. Hold the photoconductor unit’s casing by the handle and
slowly pull it out of the printer.
w
Warning:
Do not touch the fuser, which is marked CAUTION Hot
Surface. If the printer has been in use, the fuser may be very
hot.
c
Caution:
Be careful not to spill any remaining toner from the used
developer cartridge. If toner is spilled inside the printer, clean
it with a clean, dry, lint-free cloth or with a vacuum-cleaning
device.
To Next Page
Loading...
