Troubleshooting 349
11
11
11
11
11
11
11
11
11
11
11
11
The next time you print the document, reduce the resolution
setting. For a permanent solution, install an optional memory
module into the printer. See “Memory Module” on page 295 for
installation instructions.
Control panel: Ready light flashing
Indicates that the printer is warming up to process and print data.
Control panel: Error light flashing (flashes at longer intervals than
usual)
Indicates that the printer is not ready to print. Press the N
Start/Stop button to make the printer ready to print.
Control panel: Ready and Error lights flashing.
Indicates that the printer is deleting the specified print job sent
from the host computer.
Warming Up
Offline
Cancel Print Job (by host)
Toner Low
To Next Page
Loading...
