374 Troubleshooting
2. Gently pull out any sheets that have fed part way into the
printer.
3. Close the output tray, and open the printer’s front cover.
4. Remove any pieces of paper that may have torn off or are
remaining in the printer, and then close the front cover.
Note:
If necessary, take out the developer cartridge and remove any paper
left in the paper feed path. Then reinsert the cartridge.
5. Tap the edges of the paper stack on a flat surface and carefully
reload it into the MP tray.
Note:
Do not reload curled or wrinkled sheets.
6. Open the printer’s front cover again, and then close it until it
clicks shut. The jammed page’s print data is automatically
reprinted.
To Next Page
Loading...
