388 Troubleshooting
EPL-6200 only
The Image Optimum
setting may be set to Auto or
On.
If it is, fonts other than those you expect
may be printed to increase the printing
speed. Turn the Image Optimum
setting off in the Remote Control Panel
utility.
Position of the printout is not correct
Cause What to do
The page length and margins
are set incorrectly in your
application software.
Make sure that you are using the correct
page length and margin settings in your
application software.
Graphics don’t print correctly
Cause What to do
You may need more memory. Graphics require large amounts of
memory. Lower the Print Quality
setting in the printer driver. If your
printer is the EPL-6200, you can also
install more memory into the printer for
a more permanent solution. For more
information, see “Memory Module” on
page 295.
There is a page that could not be printed (EPL-6200L only)
Cause What to do
To Next Page
Loading...
