40 Using the Printer Driver For Windows
7. Click Next to continue with the installation.
8. If the USB PostScript printer driver file is correctly
recognized, the message “EPSON USB Printer” will appear.
Click Next to continue with the installation.
9. When installation of the USB PostScript printer driver is done,
click Finish.
10. After the USB printer driver installation is done, the Add
Printer Wizard will launch automatically. Follow the
on-screen instructions to continue with the installation until
the screen asking you to select the printer model is displayed.
11. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\AdobePS\english\win9x\ps_setup
(change the drive letter as needed for your system).
12. Select the INF file for the version of the Windows operating
system that you are running and continue with the rest of the
installation according to the on-screen instructions.
13. When installation is done, click Finish.
Installing the PostScript printer driver for the network interface
Follow the steps below to install the PostScript printer driver for
the network interface:
Note:
❏ To connect using a network interface, you must install the optional
interface card into the printer.
❏ You must have at least 6 MB of free space on your hard disk drive
to install the PostScript printer driver.
1. Insert the CD-ROM that shipped with your printer into the
CD-ROM drive.
To Next Page
Loading...
