46 Using the Printer Driver For Windows
6. Select the INF file for the version of the Windows operating
system that you are running and continue with the rest of the
installation according to the on-screen instructions.
7. When installation is done, click Finish.
Installing the printer driver for the network interface
Follow the steps below to install the PostScript printer driver for
the network interface:
Note:
❏ To connect using a network interface, you must install the optional
interface card into the printer.
❏ You must have at least 6 MB of free space on your hard disk drive
to install the printer driver.
1. Insert the CD-ROM that shipped with your printer into the
CD-ROM drive.
2. Click Start, then Settings, and finally Printers.
Note:
If your computer is running Windows XP, click Start and then click
Printers and Faxes.
3. Double-click the Add Printer icon.
Note:
If your computer is running Windows XP, click Add a printer
under Printer Tasks.
4. The Add Printer Wizard will be displayed. Click Next.
5. Select Network printer in the screen that appears.
Note:
If your computer is running Windows XP, click A network
printer, or a printer attached to another computer.
To Next Page
Loading...
