Using the Printer Driver For Windows 71
3
3
3
3
3
3
3
3
3
3
3
3
Wait timeout
Specify the maximum number of seconds that the printer will wait
to get more PostScript information from the computer before the
print job is automatically canceled. After the specified time
elapses, the printer will stop trying to print the document and
prints an error message instead. If you enter “0” (zero), the printer
will wait indefinitely.You may want to increase this value when
printing complicated documents.
This setting enables you to prevent the printer from stalling if and
when the computer that sends the print job stalls.
Advanced
Click this button to specify the following advanced PostScript
options:
PostScript language level
Specify the PostScript language level to use. Select the highest
PostScript language level that your printer supports to optimize
its features. Use a lower PostScript language level only if you are
experiencing printing problems or if you intend to print the file
using another printer.
Data format
Select the data format to use. The options are ASCII data, Binary
communications protocol, Tagged binary communications
protocol, and Pure binary data. However, only ASCII data and
Tagged binary communications protocol can be selected
when running under Windows Me/98/95.
If you select ASCII data, print data is sent in the ASCII (7-bit)
format, which may take longer to print, but which can be sent
through any I/O channel, including serial, parallel, and Ethernet.
To Next Page
Loading...
