Epson Expression 10000XL User Manual

Getting the Most From Your Scanner 39
Batch Scanning Photos and Film
If you’re working with photos or film, you can place multiple images on the scanner,
and then scan them all at once (instead of one-by-one) with EPSON Scan. This lets
you quickly digitize large numbers of images.
Note: If you have the Photo version of the scanner, you can use the LaserSoft Imaging
SilverFast Job Manager for high-capacity batch scanning. For details, see the on-screen
guide included with the software.
To scan multi-page documents, such as reports, use the optional ADF (see page 55).
Placing Your Photos
1. Raise the scanner cover and place your photos face-down on the glass. Be sure to
leave a space of at least 3/4 inch (20 mm) between each of the photos.
Note: If you’re scanning film, see page 48 for instructions on using the
transparency unit and film holders.
2. Close the document cover, being careful not to move your photos.
Tip: If the edges of your photos don’t scan properly, move them in about
1/16 inch (1.5 mm) from the edges of the glass.

Epson Expression 10000XL Specifications

Resolution

optical resolution	2400 dpi
maximum resolution with Micro Step Drive technology	2400 x 4800 dpi
interpolated resolution	12, 800 x 12, 800 dpi

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption operating without optional unit	45W
power consumption operating with optional unit	55W
power consumption sleep mode without optional unit	6W

Operating Environment

operating temperature	41ºF to 95ºF (5ºC to 35ºC)
operating humidity	10% to 80% (no condensation)
storage humidity	10% to 85% (no condensation)

Interface and Connectivity

interface	USB 1.1/2.0, IEEE 1394 (FireWire), optional Ethernet
system compatibility	Windows 98SE, 2000 Me, XP; Macintosh OS 9.1 or later

Weight and Dimensions

maximum scan area	12.2" x 17.2" (310mm x 437mm)
width	25.8" (656mm)
depth	18.0" (458mm)
height	6.2" (158mm)
weight	28.7 lb (13 kg approx.)