54 Using Optional Equipment
13. When scanning completes, click Close to exit EPSON Scan and view the scanned
images in your imaging application.
Scanning Paper Documents
If you want to scan an ordinary paper document while leaving the transparency unit
installed, follow these steps.
1. Remove the transparency guide.
2. Insert the reflective document mat, top
edge first, being careful to keep the mat’s
white surface from getting caught under the
frame of the TPU.
3. Insert the tabs along the bottom edge of the
mat to hold it in place.
4. Scan your document, following the
instructions in Chapter 1 for the mode that
you’re using.
Note: If you’re scanning in Professional
Mode, be sure to select Reflective as your
Document Type.
2
1
To Next Page
Loading...
