8
Setting Up Your
Scanner
Setting up your scanner is easy—just follow the simple steps in this book in the order
listed below.
1. Unpack and choose a place for your scanner.
2. Install the SCSI interface board (PC only).
3. Unlock the scanner.
4. Set the SCSI ID number.
5. Connect the scanner to your computer.
6. Power on your scanner, then power on your computer.
7. Install the scanner software.
8. Install Adobe Photoshop 5.0 LE and any other bonus software that came with
your computer.
9. Install Adobe Acrobat Reader if it’s not already on your system. View your
electronic manuals.
To Next Page
