36
Beginning Your Scan
Scans are always performed from within a host application (the application into which
you plan to import the scanned image or document). You have to start this
application before you can access your scanner software.
Once you’ve selected your scanner driver, continue with the instructions under
“Scanning with EPSON TWAIN Pro” below or “Scanning with LaserSoft SilverFast
Lite” on page 38. If you’re using LaserSoft SilverFast 4.0 as your scanner driver, see
the electronic manual on the LaserSoft SilverFast 4.0 CD-ROM for instructions
(Artist and Professional models only).
Scanning with EPSON TWAIN Pro
1. Start your host application (for example, Adobe Photoshop 5.0 LE).
2. Select your scanner driver. (Unless you change your source, you only need to do
this step once.)
For example, if you’re running Windows and using Adobe Photoshop 5.0 LE as
your host application, choose Select TWAIN_32 Source. In the Select Source
dialog box, select EPSON TWAIN Pro(32-bit). Then click Select.
If you have a Macintosh, click File, Import, Twain Select. In the Select a source
dialog box, choose EPSON TWAIN Pro and click OK.
The command you choose from the File menu differs from one
host application to another. With other host applications, you
might choose Acquire or Select Source instead of Import.
To Next Page
Loading...
