38
Generally it’s a good idea to use the Auto Exposure button to
obtain the best settings for your scan. If you’re not satisfied with
the results, see the recommended settings on page 34, or see
your electronic
EPSON TWAIN Pro User’s Guide
for more
information about choosing settings.
If you need to remove color cast from your image, use the Gray
Balance Intensity feature. See your electronic
EPSON TWAIN
Pro User’s Guide
for more information about adjusting Gray
Balance Intensity.
7. When you’ve finished making adjustments, click the Scan button.
The READY light on the front of the scanner flickers while it’s scanning. In a few
moments, a scanned image is imported into your host application’s window.
(If the READY light continues to blink, it may indicate an error condition. See
your electronic
EPSON TWAIN Pro User’s Guide
for more information.)
8. Click the close box to close the EPSON TWAIN Pro window and return to your
application.
Don’t leave photographs on the document table for long
periods of time; they may stick to the glass.
Scanning with LaserSoft SilverFast Lite
1. Start your host application (for example, Adobe Photoshop 5.0 LE).
2. Select your scanner driver. (Unless you change your source, you only need to do
this step once.)
For example, if you’re running Windows and using Adobe Photoshop 5.0 LE as
your host application, choose
Select TWAIN_32 Source
. In the Select Source
dialog box, select
Expression 800 (32-Bit)
. Then click
Select
.
If you have a Macintosh, click File, Import, Twain Select. In the Select a source
dialog box, choose Expression800 and click OK.
To Next Page
Loading...
