Epson FX-2190

Control Panel 113
R4CC530
long.bk Rev. E
A5 size CP.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
4
4
4
4
4
4
4
4
4
4
4
4
8 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a sheet is loaded.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby
position if a sheet is loaded.
9 Micro adjust
When you hold down the Pause button for three
seconds, the printer enters the micro adjust mode. In
this mode, you can press the LF/FF and Load/Eject
buttons to adjust the top of form or tear off position. See
“Using the Micro Adjust Function” on page 62.
10 LF/FF button
❏ Feeds paper line by line when pressing shortly.
❏ Ejects a single sheet or advances continuous paper
to the next top-of-form position when held down.
11 Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in the Micro Adjust
mode.