Paper Handling 17
R4CC530
long.bk Rev. E
A5 size PAPER.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
2
2
2
2
2
2
2
2
2
2
2
2
Note:
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, set the paper-thickness lever one position lower to improve
print quality.
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, multipart forms with 7 parts cannot be used.
Loading Continuous Paper
Follow the instructions in this section to load continuous paper in
the printer.
Positioning the continuous paper supply
Before using continuous paper, make sure you line up your paper
supply with the tractor feeder as shown below, so that the paper
feeds smoothly into the printer.
Loading continuous paper with the tractor
The paper loading procedure depends on where you position the
tractor which feeds paper to the printer. Follow the instructions
below for your tractor position.
To Next Page
Loading...
