64 Paper Handling
R4CC530
long.bk Rev. E
A5 size PAPER.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
3. Open the paper guide cover, then press the LF/FF button to
feed paper backward, or press the Load/Eject button to feed
paper forward, until the paper perforation is aligned with the
tear-off edge of the paper tension unit.
Note:
The printer has a minimum and a maximum tear-off position. If you
try to adjust the tear-off position beyond these limits, the printer
beeps and stops moving the paper.
4. Tear off the printed pages.
5. Press the Pause button to turn off Micro Adjust mode.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing.
Adjusting the top-of-form position
The top-of-form position is the position on the page where the
printer starts printing. If your printing appears too high or low
on the page, you can use the Micro Adjust function to adjust the
top-of-form position.
tear-off edge of the paper tension unit
paper perforation
To Next Page
Loading...
