Problem Solver 131
R4CC530
long.bk Rev. E
A5 size TROUB.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
5
5
5
5
5
5
5
5
5
5
5
5
If a problem occurs while printing, an error message appears in
the Progress Meter window.
Printing a Self Test
Running the printer’s self test helps you determine whether the
printer or the computer is causing the problem:
❏ If the self test results are satisfactory, the printer is working
properly and the problem probably results from your printer
driver settings, application settings, computer, or interface
cable. (Be sure to use a shielded interface cable.)
❏ If the self test does not print properly, there is a problem with
the printer. See “Problems and Solutions” on page 134 for
possible causes and solutions to the problem.
You can print the self test using either single sheets or continuous
paper. See “Loading Continuous Paper” on page 17 for
instructions on loading continuous paper, or “Loading Single
Sheets” on page 49 for instructions on loading single sheets.
Note:
Use paper of at least the following width:
Follow these steps to perform a self test:
1. Make sure paper is loaded and the printer is turned off.
Paper type FX-890 FX-2190
Continuous paper 241 mm
(9.5 inches)
376 mm
(14.8 inches)
Single sheet A4 or letter size A3 landscape
To Next Page
Loading...
