Epson FX-2190

Printer Software 81
R4CC530
long.bk Rev. E
A5 size PD.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
3
3
3
3
3
3
3
3
3
3
3
3
❏ The printer is connected directly to the host computer via the
parallel port [LPT1].
❏ Your system is configured to support bidirectional
communication.
EPSON Status Monitor 3 is installed when you install the printer
driver as described in the Setup Sheet.
Note:
If you install the driver using Add Printer in the Printers folder, or using
the “Point and Print” method, EPSON Status Monitor 3 may not
function properly. If you want to use EPSON Status Monitor 3, reinstall
the driver as described in the Setup Sheet.
Before using EPSON Status Monitor 3, be sure to read the
README file on the printer software CD-ROM. This file contains
the latest information on the utility.
Setting up EPSON Status Monitor 3
Follow these steps to set up EPSON Status Monitor 3:
1. Open the Utility menu as described in “Using the Printer
Driver with Windows Me, 98, and 95” on page 68 or “Using
the Printer Driver with Windows XP, 2000 and NT 4.0” on
page 72.