130 Problem Solver
R4CC530
long.bk Rev. E
A5 size TROUB.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
O = on, N= off, F = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
EPSON Status Monitor 3
EPSON Status Monitor 3 provides status messages and a graphic
display showing the current status of the printer.
F Paper Out
O Pause
••• A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
••• Continuous paper is not fed to the standby
position.
Tear off the printed page at the perforation; then
press the Load/ Eject button. The printer feeds the
paper to the standby position.
••• Paper is jammed in the printer.
To clear the paper jam, see “Clearing Paper Jams”
on page 151.
F Pause — The print head is overheated.
Wait for a few minutes; the printer resumes printing
automatically once the print head cools.
F Paper Out
F Pause
FFTear
Off/Bin
FF F Font
FF F Pitch
••••• An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the error
recurs, contact your dealer.
State of
panel lights
Beep
pattern
Problem
Solution
To Next Page
Loading...
