Epson FX-2190

50 Paper Handling
R4CC530
long.bk Rev. E
A5 size PAPER.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
Available paper types
The table below shows the types of paper you can load and the
paper slots you can use with each paper type. See “Adjusting the
Paper-Thickness Lever” on page 15 for instructions on how to
adjust the paper-thickness lever.
Note:
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, set the paper-thickness lever one position lower to improve
print quality.
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, multipart forms with 7 parts cannot be used.
❏ Do not load paper that is curled or has been folded.
Using the paper guide
Using the paper guide that comes with your printer, you can load
one single sheet or envelope at a time from the top of the printer.
Your single-sheet paper can be up to 257 mm (10.1 inches) wide
on the FX-890 and 420 mm (16.5 inches) wide on the FX-2190. (See
“Printer Specifications” on page 207 for detailed paper
specifications.)
Paper type Available paper slot(s)
Ordinary paper front and rear
Multipart forms (carbonless)
2parts (original and one copy)
3 parts (original and two copies)
4 parts (original and three copies)
5parts (original and four copies)
6parts (original and five copies)
front
Envelopes rear