138 Problem Solver
R4CC530
long.bk Rev. E
A5 size TROUB.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
Printing position problems
Wrong top-of-form position
Single-sheet paper is in the
paper path.
Press the Load/Eject button to eject the
sheet.
Continuous paper is not
loaded properly.
See “Loading Continuous Paper” on
page 17 for instructions on loading
continuous paper with the tractor you
want to use.
The paper-thickness lever is
not set correctly.
Set the paper-thickness lever to match
the thickness of your paper. See
“Adjusting the Paper-Thickness Lever”
on page 15 for instructions.
The printer does not feed continuous paper to the standby
position.
Cause What to do
You have not torn off the
printed pages before pressing
the Load/Eject button.
Tear off the printed pages at the
perforation. Then press the Load/Eject
button to feed the paper backward to the
standby position.
Your printing appears too high or low on the page.
Cause What to do
To Next Page
Loading...
