Epson FX-2190

Control Panel 119
R4CC530
long.bk Rev. E
A5 size CP.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
4
4
4
4
4
4
4
4
4
4
4
4
Auto tear-off
When auto tear-off is on and you are using continuous paper with
the front or rear push tractor, the printer automatically advances
the paper perforation to the tear-off position, where you can easily
tear off the printed page(s). When the printer receives data again,
it automatically moves the paper back to the top-of-form position
and starts printing, so you can use all of the next page.
When auto tear-off is off and you are using continuous paper with
the front or rear push tractor, you need to move the perforation
to the tear-off position manually by pressing the Tear Off/Bin
button. See “Using the Tear-off Function” on page 47 for more
information.
Auto line feed
When auto line feed is on, the printer accompanies each carriage
return (CR) code received with a line feed (LF) code.
Print direction
You can select auto print direction, bidirectional printing (Bi-D),
or unidirectional printing (Uni-D). Printing is normally
bidirectional; however, unidirectional printing allows for precise
vertical printing alignment.
Software
When you select ESC/P, the printer operates in the EPSON ESC/P
mode. When you select IBM PPDS, the printer emulates an IBM
printer.