140 Problem Solver
R4CC530
long.bk Rev. E
A5 size TROUB.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
Wrong tear-off position
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause What to do
The tear-off position setting is
incorrect.
Adjust the tear-off position using the
Micro Adjust function. See “Adjusting
the top-of-form position” on page 64.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
You moved the paper using
the knob while the printer was
on.
Adjust the tear-off position using the
Micro Adjust function. See “Adjusting
the top-of-form position” on page 64.
The printer you want to use is
not selected in your software.
Choose the correct printer from the
Windows desktop or in your application
before printing.
The paper size setting in your
application or printer driver
does not match the size of the
paper you are using.
Check the paper size setting in your
application or printer driver.
The printer’s page length
settings for the front or rear
tractor do not match the size of
the paper you are using.
Check the page length settings for the
front or rear tractor using the printer’s
default-setting mode. See “Changing
default settings” on page 122.
To Next Page
Loading...
