216 Product Information
R4CC530
long.bk Rev. E
A5 size APSPE.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
Continuous paper (ordinary and multipart):
* When the front or bottom pull tractor is installed and under normal conditions,
up to 7 copies (1 original + 6 copies) can be used.
Note:
❏ Do not load thick paper, such as multipart forms with five or six
parts, in the rear slot.
❏ The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1.
❏ The thickness of the perforation part when extended should be 1mm
or less.
❏ The perforation between pages should not extend all the way to the
edges of the paper. Uncut length on the edges should be 1mm or
more.
Minimum Maximum
Width FX-890: FX-2190:
(mm)
(inch)
101.6
4.0
254.0
10.0
406.4
16.0
Length, one page (mm)
(inch)
101.6
4.0
558.8
22.0
Copies 1 original + 5 copies*
Total thickness (mm)
(inch)
0.065
0.0025
0.46
0.018
Weight,
ordinary paper
(g/m²)
(lb)
52
14
82
22
Weight,
per sheet of multipart
(g/m²)
(lb)
40
12
58
15
Quality Plain paper, recycled paper, and
carbonless multipart forms with point
gluing or paper stapling on both sides
To Next Page
Loading...
