Epson L6290 Series User Manual

Straight Lines Appear when Sending Faxes from the ADF
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
& “Cleaning the ADF” on page 117
The Image Quality of the Sent Fax is Poor
e
following causes can be considered.
The resolution is set to low.
Solutions
If you do not know the performance of the sender’s fax machine, set the following before sending a fax.
❏ Select Fax > Fax Settings and then make the Resolution setting to set the highest quality image.
❏ Select Fax > Fax Settings and then enable Direct Send.
Note that if you set Resolution to Photo but you send the fax without enabling Direct Send, the fax
may be sent at a lower resolution.
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel.
is
may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when ECM is disabled.
An Image of the Reverse Side of the Original Appears in the Sent Fax
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > The Quality of the Sent Fax is Poor
219

Epson L6290 Series Specifications

General

Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Handling Output	30 sheets
Functions	Print, Scan, Copy, Fax
Dimensions (W x D x H)	375 x 347 x 231 mm
Weight	6.7 kg
Print Technology	Inkjet
Scanner Type	Flatbed colour image scanner
Paper Handling Input	250 sheets
Duplex Printing	Yes (automatic)
Mobile Printing	Apple AirPrint, Mopria
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	2.4" color touchscreen
Ink Bottle Yield (Color)	up to 6, 000 pages
Ink Bottle Yield (Black)	up to 7, 500 pages