Making Fax Features Available
Before Using Fax Features
Set up the following to use the fax features.
❏ Connect the printer correctly with the phone line and, if necessary, with a phone
❏ Complete the Fax Setting Wizard, which is required to make basic settings.
Set the following as necessary.
❏ Output destinations and related settings, such as network settings.
❏ Contacts registration
❏ User Settings that dene default values for Fax menu items
❏ Report Settings to print reports when faxes are sent or received
Related Information
& “Connecting the Printer to a Phone Line” on page 289
& “Making the Printer Ready to Send and Receive Faxes” on page 293
& “Making Settings for the Printer's Fax Features According to Use” on page 294
& “Fax Settings” on page 262
& “Making Contacts Available” on page 286
& “User Settings” on page 270
& “Report Settings” on page 267
Connecting the Printer to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or ber-optic digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
Related Information
& “Connecting the Printer to a Phone Line” on page 290
Administrator Information
>
Settings to Use the Printer
>
Making Fax Features Available
289