5.
Make the Receive Mode setting.
❏ If you do not need to connect a phone device to the printer:
Select No.
Receive Mode is set to Auto.
❏ If you need to connect a phone device to the printer:
Select Ye s , and then select whether or not to receive faxes automatically.
6.
Check the settings you made on the screen displayed, and then proceed to the next screen.
To correct or change settings, select
.
7.
Check the fax connection by selecting Start Checking, and then select Print to print a report that shows the
connection status.
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type.
- When you are connecting the printer to a PBX phone system or terminal adapter, select PBX.
- When you are connecting the printer to a standard phone line, select PSTN, and then select Do Not Detect on the
Conrmation screen displayed. However, setting this to Do Not Detect may cause the printer to skip the rst digit of
a fax number when dialing and send the fax to the wrong number.
Related Information
& “Connecting the Printer to a Phone Line” on page 289
& “Making Settings to Use an Answering Machine” on page 295
& “Receive Mode:” on page 264
& “Making Settings to Receive Faxes Operating Only a Connected Phone” on page 296
& “Basic Settings” on page 263
Making Settings for the Printer's Fax Features According to Use
You can congure the printer's fax features individually using the printer's control panel according to use. e
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
Related Information
& “Fax Settings” on page 262
& “Making Settings for a PBX Phone System” on page 295
& “Making Settings When You Connect a Phone Device” on page 295
& “Receiving Incoming Faxes” on page 93
& “Making Settings to Save Received Faxes” on page 296
& “Making Settings for Blocking Junk Faxes” on page 297
& “Making Settings to Send and Receive Faxes on a Computer” on page 297
Administrator Information
>
Settings to Use the Printer
>
Making Fax Features Available
294