16 Transporting Your Product
Transporting Your Product
If you need to store or transport your product, prepare it as described here.
Caution:
■ Avoid tilting the product, placing it vertically, or turning it upside down; otherwise
ink may leak.
■ Leave the ink cartridge installed. Removing the cartridge can dry out the print head
and may prevent the product from printing.
■ Do not subject the product to strong impacts or you may damage it.
■ Do not leave the product in direct sunlight, near heaters, inside cars, and other
areas subject to high temperatures. Otherwise, the product may get damaged or
leak ink.
1. Turn off the product by pressing the P button.
2. Make sure the green power light on the front of the product is turned off and then
unplug the power cord.
Caution: Make sure the power light is off before unplugging the power cord;
otherwise, the print head may not return to the home position. This can cause the
print head to dry out which may prevent the product from printing.
3. Remove all the paper from the product.
4. Remove any memory cards inserted in the product.
5. Disconnect any connected cables.
6. Close the cover and output tray as shown.
7. Place the product in a bag if traveling a short distance or in its original packaging
materials (or equivalent packing materials) when transporting the product a long
distance.
pm_400_quick_guide.book Page 16 Wednesday, July 8, 2015 3:44 PM
To Next Page
Loading...
Need help?
General
