Epson PM-400

12 Replacing the Ink Cartridge
Replacing the Ink Cartridge
Make sure you have a new ink cartridge before you begin. You must install the new
cartridge immediately after removing the old one.
Caution: Do not open the ink cartridge package until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out. If you remove a low or
expended ink cartridge, you cannot reinstall and use the cartridge.
1. Turn on your product.
2. If an ink cartridge is expended, you see a message on the LCD screen. Press the
OK
button.
If you’re replacing a cartridge before you see a message on the LCD screen, press
if
necessary, then select
Setup > Maintenance > Ink Cartridge Replacement. Press
the
OK button to proceed.
3. Unpack the ink cartridge and completely remove the yellow tape only.
Caution: Do not remove any other labels or seals, or ink may leak.
pm_400_quick_guide.book Page 12 Wednesday, July 8, 2015 3:44 PM