Epson PP-1002 User Manual

118
Error Associated with Ink
Stacker 3 is full.
Remove published discs from Stacker 3.
Only for PP-100II/PP-100/PP-100AP
Stacker 4 is full.
Remove published discs from Stacker 4.
Only for PP-100II/PP-100/PP-100AP
Stacker 4 is open.
Close Stacker 4.
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4
Ink low
Prepare a new ink cartridge. Use of Epson brand
ink cartridges is recommended.
The ink has reached its replacement time or it is
not installed correctly.
Replace the ink cartridge or reinstall it. (See
“How to Replace the Ink Cartridges” on page
82.)
If the ink cartridge is not recognized even if it is
installed correctly, there may be dirt on the
green circuit board. Wipe it with soft cloth and
install it again.
The product will stop operation before ink is
completely empty in order to maintain print
head quality. Therefore, some ink will be left in
the ink cartridge. Use of Epson brand ink
cartridges is recommended.
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4

Epson PP-1002 Specifications

General

Brand	Epson
Model	PP-1002
Category	Disc Duplicator
Language	English