58
External Output mode:
When you want to publish two type of discs without having to change discs
This mode uses Stacker 1 and Stacker 2 as the input stackers for discs. You can select Stacker 3 or Stacker 4 as the
output stacker.
If, for example, CD-Rs are loaded in Stacker 1 and DVD-Rs are loaded in Stacker 2, you can just select a stacker as
necessary to publish the required discs without having to change the discs.
If you select Stacker 4 as the output stacker, you can easily take out published discs without even having to pause a
job during publishing.
• When you select Stacker 3 as the output stacker
• When you select Stacker 4 as the output stacker
To Next Page
Loading...
Need help?
General
