88
How to Clean the Print Head
There are the following two ways to run head cleaning.
• Running it using the control panel on the product
• Running it from a PC
Running it using the control panel on the product
1
Turn the product on.
2
Press the Cleaning button for 3 seconds.
The BUSY light flashes, and head cleaning starts.
When head cleaning is finished, the BUSY light goes off.
Running it from a PC
1
Display the Printer Utility screen of the EPSON Total Disc Utility.
See “Properties screen (General screen)” on page 41 for display procedure.
2
Click Head Cleaning.
• Print head cleaning consumes ink. Note that if you run head cleaning more than
necessary, the lifetime of the ink cartridges is reduced.
• Do not open the ink cartridge cover while cleaning the print head. Print head cleaning
stops if the cover is opened.
• If there is a job being published, head cleaning starts after processing of the job is
finished.
To Next Page
Loading...
Need help?
General
