73
Publishing Discs
Job Operations
Processing performed by this product, such as writing and printing data, is called a “job.”
After publishing a job with EPSON Total Disc Maker or the printer driver, you can pause/cancel it or change the
processing order of jobs.
Pausing/Cancelling Jobs
Follow the steps below to pause or cancel a job.
1
Start up EPSON Total Disc Utility.
See “Starting EPSON Total Disc Utility” on page 39.
2
Select the job for which you want to pause/cancel processing, and click [Pause]/
[Cancel].
When the job is paused, the job status display changes to Paused.
When the job is cancelled, the job display disappears from the Unfinished Job screen.
• If a job is paused when there is a disc being published, the job is paused after the
processing is finished.
• The processing of any subsequent job also does not start while the job is paused.
• If a job is cancelled when the disc is being published, that processing is stopped, and
the disc is output to the output stacker.
Selecting a paused job and clicking [Resume] / [Cancel] allows you to resume or
cancel the job.
To Next Page
Loading...
