Epson PP-1002 User Manual

90
Aligning the Print Head
If the print position when the print head moves from right to left is not aligned with the print position when the print
head moves from left to right, gaps may appear in vertical lines, and the print results may become blurry. If this
happens, run print head alignment.
1
Set one unprinted disc into Stacker 1.
2
Display the Printer Utility screen of the EPSON Total Disc Utility.
See “Properties screen (General screen)” on page 41 for display procedure.
3
Click Print Head Alignment.

Epson PP-1002 Specifications

General

Brand	Epson
Model	PP-1002
Category	Disc Duplicator
Language	English